User Guide

Advanced Topics

API

The availability calculation process is a complex multi-step algorithm that involves two major phases. The first phase consists of identifying the time periods over which the availability calculations must be performed. The second phase calculates the availability for each of those periods identified in the previous phase.

Phase One - Identify the Availability Periods

In order to explain the details of the availability calculations, we will use here a simplified request model that differs from the implementations in the following respects:

  • Represents dates in a human readable format instead of in epoch milliseconds

  • Ignores the timezone

  • Uses a simplified event format

Consider the following pseudo request.

Note

The format of this request is not valid for the SLM module as the real dates should be in Unix time format. We also explicitly omit the array of events for the moment.

{
    "output_format": "json"
    "time_period": {
        "ranges": {
            "monday": "08:00-18:00",
            "tuesday": "08:00-12:00"
        }
    },
    "time_zone": "Europe/Rome",
    "calculation_period": {
        "type": "weekly",
        "start": "monday"
    },
    "time_range": {
        "from": "Friday 1st January 2010 at 00:00 am",
        "to": "Monday 25th January 2010 at 00:00 am"
    },
    "initial_state": "0",
    "consider_downtime" : false,
    "consider_event_adjustments" : false,
    "events": [],
    "last_hard_states": [],
    "downtimes": [],
    "event_adjustments": [],
    "target_availability": 99.5,
    "expected_monitored_objects": [],
    "locale": "en_US"
}

In the following section we will focus principally on understanding how the calculation periods are determined. To identify them, three elements from the request are used:

  1. The Time Frame in time_range

  2. The calculation_period

  3. The ranges from the time_period

In our example request above, the time_range is:

  • From: Friday, January 1st 2010 at 00:00am

  • To: Monday, January 25th 2010 at 00:00 am

Consequently, the events taken into account are all the events that occur within the time_range. In order to determine the availability during the initial period of the time range, SLM reports, for each monitored object, take into account also the last event occurring before the start of the time_range.

Once we have identified the time_range, we use the calculation_period to split the range into the desired calculation blocks. The final availability will be calculated for each one of these blocks independently.

The calculation_period of our request is set to weekly/monday. This means that we want availability aggregated by groups of seven days starting on Mondays. As noted above, our time_range spans from January 1st to January 25th, for a total of 25 days. If we split it into blocks of one week, we will obtain 5 availability periods:

  1. From Friday, January 1st to Sunday, January 3rd

  2. From Monday, January 4th to Sunday, January 10th

  3. From Monday, January 11th to Sunday, January 17th

  4. From Monday, January 18th to Sunday, January 24th

  5. Monday, January 25th

Since only full calculation periods are taken into account, the first and last blocks will be discarded since they last less than a full week. Consequently, the final calculation will include only three periods for a total of 21 days.

The last step is to exclude from each of the availability periods the times that do not match the requested time_period ranges:

  1. Monday from 08:00 to 18:00

  2. Tuesday from 08:00 to 12:00

If we apply this to the three availability periods in the previous step, we will arrive at the definitive calculation blocks:

  • The first availability period will include the aggregated statistics of:

    • Monday, January 4th from 08:00 to 18:00

    • Tuesday, January 5th from 08:00 to 12:00

  • The second will include the aggregated statistics of:

    • Monday, January 11th from 08:00 to 18:00

    • Tuesday, January 12th from 08:00 to 12:00

  • The third and final one will include the aggregated statistics of:

    • Monday, January 18th from 08:00 to 18:00

    • Tuesday, January 19th from 08:00 to 12:00

Phase Two - Calculate the Availabilities for each period

In the preceding section, we determined the required availability periods. Now, let’s create a sequence of monitoring events and see how they impact the availability calculations.

Like we did in the previous section, for the purpose of explaining this phase, we will make some assumptions:

  • All the events originate from the same host.

  • The calculations are performed in hours instead of milliseconds.

  • The downtimes are ignored (see section How the Downtime Calculations Work for downtime calculation).

Here is our example sequence of events:

  1. Thursday January, 7th at 00:00 -> hard_state DOWN

  2. Monday, January 11th at 10:00 -> hard_state UP

  3. Monday, January 11th at 20:00 -> hard_state DOWN

  4. Tuesday, January 12th at 10:00 -> hard_state UP

  5. Tuesday, January 12th at 11:00 -> hard_state DOWN

  6. Wednesday, January 13th at 00:00 -> hard_state UP

First, let’s calculate the availability for the first period, which includes:

  • Monday, January 4th from 08:00 to 18:00

  • Tuesday, January 5th from 08:00 to 12:00

Since the first event is after Monday the 4th at 8:00AM, we do not know the state of the host at the beginning of the period. Consequently, we will use the initial_state field, which represents the state of the host at beginning of the report, if it cannot be determined by analyzing the events in the request.

In our case this value is 0 (i.e., UP) and, as the initial_state is always of type hard_state, from the beginning of the period, the host is in state hard_up. The initial_state always defaults to 0 in the reports generated via NetEye GUI.

The state of the host never changes during the first period, because there are no events to alter it. Thus we have:

  • 10 hours of state hard_up* on Monday, January 4th from 08:00 to 18:00

  • 4 hours of state hard_up* on Tuesday, January 5th from 08:00 to 12:00

In summary, the availability results for the first period are:

  • total time: 12 hours

  • hard_up time: 12 hours (100% of the total time)

The second availability period includes:

  • Monday, January 11th from 08:00 to 18:00

  • Tuesday, January 12th from 08:00 to 12:00

The only event preceding the period takes place on Thursday, January 7th, at 00:00 sets the host state to hard_down. So on Monday, January 11th at 08:00 the state is hard_down.

At 10:00 on Monday, January 11th we receive a hard_up event, and now the host state becomes hard_up.

Subsequently, we have two events on Tuesday, January 12th, the first of which sets the state to hard_up at 10:00, and the second of which sets the state to hard_down one hour later.

So, we have:

  • 2 hours of state hard_down on Monday, January 11th from 08:00 to 10:00

  • 8 hours of state hard_up on Monday, January 11th from 10:00 to 18:00

  • 2 hours of state hard_up on Tuesday, 12th January from 08:00 to 10:00

  • 1 hours of state hard_down on Tuesday, 12th January from 10:00 to 11:00

  • 1 hours of state hard_up on Tuesday, 12th January from 11:00 to 12:00

In summary, the availability results for the second period are:

  • Total time: 12 hours

  • hard_up time: 9 hours (75% of the total time)

  • hard_down time: 3 hours (25% of the total time)

The third availability period includes:

  • Monday, January 18th from 08:00 to 18:00

  • Tuesday, January 19th from 08:00 to 12:00

During this time there are no events, so the state for the entire period is that of the last event received before the time period. Since this is the one received on Wednesday, January 13th at 00:00 that sets the state to hard_up, the availability result for the third period are:

  • Total time: 12 hours.

  • hard_up time: 12 hours (100% of the total time).

Warning

The Icinga2 IDO retention policy settings may affect the SLM availability Reports. Please see Interaction with IDO retention policy for more details.

How the Downtime Calculations Work

When calculating availability, the SLM module can optionally take into account planned downtimes for hosts and services. You can enable this behavior by using the consider_downtime key in the calculation request, and setting it to true, then adding a downtimes array. We will refer to the following example request:

{
   "output_format": "json",
   "time_period": "{ ... }",
   "time_zone": "Europe/Rome",
   "calculation_period": "{ ... }",
   "time_range": {
        "from": "1555000000000",
        "to": "1561000000000"
    },
   "initial_state": "0",
   "consider_downtime": true,
   "consider_event_adjustments": false,
   "events": [
       {
           "host_name": "host1.example.com",
           "service_description": "disk_agent",
           "timestamp": "1560000000000",
           "state": "0",
           "type": "hard_state"
       },
       {
           "host_name": "host1.example.com",
           "service_description": "disk_agent",
           "timestamp": "1560000500000",
           "state": "-1",
           "type": "dt_end"
       },
       {
           "host_name": "host1.example.com",
           "service_description": "disk_agent",
           "timestamp": "1560001000000",
           "state": "2",
           "type": "soft_state"
       }
   ],
   "last_hard_states": [
       {
           "host_name": "host1.example.com",
           "service_description": "disk_agent",
           "timestamp": "1560000000000",
           "state": "0"
       }
   ],
   "downtimes":[
       {
            "depth": 2,
            "host_name": "host1.example.com",
            "service_description": "disk_agent"
       }
   ],
   "event_adjustments": [],
   "target_availability": 99.5,
   "expected_monitored_objects": [
        {
            "host_name": "host1.example.com",
            "service_description": "disk_agent"
        }
   ],
   "locale": "en_US",
   "average_availability": {
        "show_calendar": true
   }
}

Due to the fact that the consider_downtime property above is true, the availability calculation will take into account any listed downtimes.

During the calculation, important data is provided in the downtimes field of the request. This data is a list of the downtime status at the beginning of the time_range for each monitored host or service.

As downtimes can be nested, the depth value is used to represent their nesting level (check the table below and the underneath paragraphs for an example of nested downtimes). A depth value of zero implies that there was no downtime during the interval in question.

For example, in the example above, we know that:

  • At the epoch instant 1555000000000 (which corresponds to time_range.from) the service disk_agent on host ‘host1.example.com’ was in planned downtime.

  • In addition, we know that the downtime depth was 2.

If a service or host is not included in the downtimes list, it will by default be considered as not in downtime.

Consider this hypothetical ordered sequence of events for a given host to clarify how the states and downtime depth are calculated:

Table 16 Downtime Event Sequence Example

Time Instant

Received Event State Type

Received Event State

Calculated Availability State

Downtime Depth

1000

hard_state

0

operative.hard_up

0

2000

dt_start

-1

in_downtime.hard_up

1

3000

dt_start

-1

in_downtime.hard_up

2

4000

hard_state

2

in_downtime.hard_down

2

5000

dt_end

-1

in_downtime.hard_down

1

6000

hard_state

0

in_downtime.hard_up

1

7000

dt_end

-1

operative.hard_up

0

The explanation for the data sequence above is:

  • From time 1000 to 2000: The downtime depth is zero, so the host is not in downtime and we have 1000ms of availability state hard_up in the operative mode.

  • From 2000 to 3000: A downtime period is starting, so the depth is increased by 1 and the host is now in planned downtime. So we have 1000ms of availability state hard_up but in the in_downtime mode.

  • From 3000 to 4000: Another downtime period is starting, so the depth is now increased to 2 and the host is still in downtime. We have an additional 1000ms of availability state hard_up in the in_downtime mode.

  • From 4000 to 5000: We received a hard_state 2. The downtime depth does not change and the host is still in planned downtime. We have now 1000ms of availability state in the in_downtime mode, but the calculated state is now hard_down.

  • From 5000 to 6000: We received dt_end*, so the downtime depth is decreased by 1 but the host is still in planned downtime. We have an additional 1000ms of availability state hard_down in the in_downtime mode.

  • From 6000 to 7000: We received hard_state 0 and the host is still in planned downtime. We have 1000ms of availability state hard_up in the in_downtime mode.

  • After 7000: We received dt_end, so the downtime depth is decreased by 1 and the host is no longer in downtime because the depth value is now zero. From this moment on, the calculated status will be state hard_up in the operative mode.

When the consider_downtime property is instead false, then:

  1. The availability states are always considered as operative. Consequently, no time will be accounted as in_downtime.

  2. Any received dt_start and dt_end events will be reported in the events.skipped section of the response. For instance, the above event sequence example would have generated this skipped report:

{
    "events": {
        "skipped": {
          "dt_start": 2,
          "dt_end": 2
        },
        "unknown": 0
    }
}

How the Event Adjustments Calculations Work

When calculating availability, the SLM module can optionally take into account event adjustments for hosts and services. You can enable this behavior by setting the consider_event_adjustments flag in the calculation request to true, and then adding an event_adjustments array at the top level of the input as in this example:

{
   "output_format": "json",
   "time_period": "{ ... }",
   "time_zone": "Europe/Rome",
   "calculation_period": "{ ... }",
   "time_range": {
        "from": "1555000000000",
        "to": "1561000000000"
    },
   "initial_state": "0",
   "consider_downtime": false,
   "consider_event_adjustments": true,
   "events": [
       { }
   ],
   "downtimes":[],
   "event_adjustments": [
      {
        "host_name": "test-logmanager",
        "service_description": null,
        "start": "1559661092000",
        "end": "1559661093000",
        "event_type": "up"
      },
      {
        "host_name": "docker-jenkins-node-01",
        "service_description": null,
        "start": "1559661092000",
        "end": "1559661096000",
        "event_type": "down"
      }
   ],
   "target_availability": 99.5,
   "expected_monitored_objects": [],
   "locale": "en_US",
   "average_availability": {
        "show_calendar": true
   }
}

Because the consider_event_adjustments flag in the above example is set to true, the availability calculation will take into account any adjustments listed in the event_adjustment field of the request.

An event adjustment sets the status of a monitoring object to a specific value over a given time range, regardless of the events that actually happened within that time range.

After the event adjustment end instant, the status of the calculation will be the one of the last event received before that instant.

For instance, in the example above, the status of the host test-logmanager will be changed to hard ok between the instants 1559661092000 and 1559661093000 if the events array were to contain entries that indicating a different status.

Event adjustments cannot overlap or be nested.

How the timeframe availability calculations work

In addition to the availability of each calculation period, the SLM Module provides also the global timeframe availability of an object calculated as the weighted mean of the availabilities of the single calculation periods.

For example, if we have these availabilities for a host in a timeframe from the 1st to the 15th of January:

Table 17 Availabilities in a report with daily calculation period

Availability period

Availability percentage

from January 1st to 3rd

100%

from January 7th to 8th

40%

January 11th

100%

Then the host timeframe availability will be calculated as: ((100% * 3) + (40% * 2) + (100% * 1)) / 6 = 80%

Note

The timeframe availability calculation takes into account only the complete calculation periods. For example, performing a monthly report from the 10th of April to the 15th of July will generate a timeframe availability that involves only the months of May and June.

Interaction with IDO retention policy

The Icinga 2 IDO DB retention policy settings may affect the SLM availability Reports. This happens because the availability calculations of the SLM module relies on the state change events present in the Icinga 2 IDO DB and the retention policy may delete older events which are still relevant for determining the availability of a Host or Service.

Moreover, there is the possibility that the outcome of an SLM Report will differ depending on the time it was generated, since the Icinga 2 IDO DB retention policy continuously removes events older than the defined age in days. For this reason, please configure the days in the Icinga 2 IDO DB retention policy, with a value sufficient to avoid impacting any of your SLM Reports. You can set this policy under Configuration ‣ Modules ‣ neteye ‣ Configuration.

Additionally, in case some events are missing from the history, remember that you can always create proper Event Adjustments to fix the problem.

To overcome some issues deriving from the deletion of old Icinga2 events, the SLM availability calculation takes, as optional parameter, an array of last_hard_states taken from Icinga 2’s attributes (see Tables Runtime Attributes of Hosts and Services in Icinga2 documentation for details) of hosts and services. This information can integrate and complete the information given by the events array and represents which was the last hard state of a Monitored Object. This parameter is useful when state change events of a monitored object are no longer available, but the information about the last hard state is still stored in the Monitored Object status.

The following are the hard states considered by the SLM module:

  • for hosts: UP and DOWN

  • for services: OK, WARNING, CRITICAL, and UNKNOWN

The last_hard_state of a monitored object is only taken into account when no other events of type hard state are passed for that monitored object.

Consider as an example the following request:

{
   "output_format": "json",
   "time_period": "{ ... }",
   "time_zone": "Europe/Rome",
   "calculation_period": "{ ... }",
   "time_range": {
        "from": "1555000000000",
        "to": "1561000000000"
    },
   "initial_state": "0",
   "consider_downtime": false,
   "consider_event_adjustments": true,
   "events": [
       {
           "host_name": "host1.example.com",
           "service_description": null,
           "timestamp": "1560000000000",
           "state": "0",
           "type": "hard_state"
       }
   ],
   "last_hard_states": [
       {
           "host_name": "host1.example.com",
           "service_description": null,
           "timestamp": "1560000000000",
           "state": "0"
       },
       {
           "host_name": "host2.example.com",
           "service_description": null,
           "timestamp": "1550000000000",
           "state": "0"
       }
   ],
   "downtimes":[],
   "event_adjustments": [],
   "target_availability": 99.5,
   "expected_monitored_objects": [],
   "locale": "en_US",
   "average_availability": {
        "show_calendar": true
   }
}

The last_hard_state timestamp of the host host1.example.com will be discarded since a hard_state event type for the host host1.example.com is already present in the events array.

On the contrary, since no hard events are present for host host2.example.com, the last_hard_state of the host host2.example.com will be treated as an actual hard event and will affect the availability calculation. This last hard state will allow to compute the availability of host host2.example.com even though no event for that host is present in events.

In this example, the status of the host host2.example.com will be considered as hard up from the instant 1550000000000, onwards.

Example Scenarios

To help you understand how the SLM availability computation works together with the IDO retention policy, please have a look at the following scenarios.

Note

For the sake of simplicity in these scenarios we will not take into account the Operational Times and Calculation Periods.

All scenarios depicted below show a service that changes to an OK status, but the same reasoning applies to any Monitored Object transitioning to any hard state mentioned in the previous section.

Scenario 1

In Scenario 1, for the Monitored Object in consideration we only have 1 state change (A changes to OK), occurring outside the retention period. This state change is then not available in the state history. Instead, the last_hard_state is always available, hence this information is used to compute the availability of the Monitored Object throughout the Report Time Frame.

  • The reported availability is therefore: 100%

../../_images/scenario-1.svg

Fig. 145 Scenario 1

Scenario 2

In Scenario 2, we have one state change (A, Hard Critical) occurring before the retention period and one state change (B, OK) occurring within the retention period.

Since A occurred before the retention period, and last_hard_state does not represent that state change, it is not possible to assess with certainty which was the status of the Monitored Object before B. In absence of data, by default SLM guesses that during the initial period the Monitored Object was available.

  • The reported availability is therefore: 100%

../../_images/scenario-2.svg

Fig. 146 Scenario 2

Scenario 3

In Scenario 3, we have two state changes (A, Hard Critical, and B, OK, in this order) occurring before the retention period, but within the Report Time Frame.

A is no longer available, so, thanks to the last_hard_state we only know that the Monitored Object, from B onwards, was available. Again, since we do not know the status before B, SLM assumes that the Monitored Object was available.

  • The reported availability is therefore: 100%

../../_images/scenario-3.svg

Fig. 147 Scenario 3

Scenario 4

In Scenario 4, we have one state change (A, Hard Critical) occurring before the retention period but within the Report Time Frame, and another (B, OK) occurring within the retention period and within the Report Time Frame.

A is no longer available during the computation, while B is, because it occurred within the retention period and because the last_hard_state corresponds to it.

Since in the computation we only know that the Monitored Object was available after state change B, SLM assumes that before state change B the Monitored Object was available.

  • The reported availability is therefore: 100%

../../_images/scenario-4.svg

Fig. 148 Scenario 4

Scenario 5

In Scenario 5, we have state change A (Hard Critical) occurring before the retention period and before the Report Time Frame, and Downtime B (which has a duration of 25% of the Report Time Frame) occurring before the retention period but within the Report Time Frame.

Thanks to the fact that last_hard_state corresponds to A, A will be taken into account for the availability calculation, despite occurring outside the retention period. Also Downtime B will be taken into account for the availability calculation because the IDO retention policy is not applied on Downtimes in NetEye 4.

  • The reported availability is therefore: 25%

../../_images/scenario-5.svg

Fig. 149 Scenario 5

Scenario 6

In Scenario 6, the Monitored Object considered was created (A) after the end of the Report Time Frame. Hence also its last_hard_state (B) occurred after the end of the Report Time Frame.

In this case, the SLM availability calculation discards the state change B because it occurs after the Report Time Frame and so it has no effect on the availability calculation. Since there is no relevant event for the duration of the Report Time Frame, SLM cannot say anything about the availability of the Monitored Object.

  • SLM will report: No events associated with this monitored object

../../_images/scenario-6.svg

Fig. 150 Scenario 6

Ignored events

Some types of events are ignored by the calculation algorithm. This happens when the event belongs to one of the following categories:

  • skipped: any occurrence of the following event types that have no impact on availability:

    • notify

    • comment

    • comment_deleted

    • ack

    • ack_deleted

    • dt_comment

    • dt_comment_deleted

    • flapping

    • flapping_deleted

    • dt_start (only if consider_downtime* is set to false)

    • dt_end (only if consider_downtime* is set to false)

    • unknown: Any event that is of a type not known to the Backend

An End-to-End Calculation Example

As mentioned at the beginning of the chapter, the /api/availability_calculation_full endpoint receives HTTP POST requests in JSON format. In this section we show an example of how the availability is calculated, using the following valid request body:

{
    "output_format": "json",
    "time_period": {
        "display_name": "Time period test name",
        "object_name": "timeperiod_test",
        "ranges": {
            "monday": "08:00-18:00",
            "tuesday": "08:00-12:00,13:00-18:00"
        }
    },
    "time_zone": "Europe/Rome",
    "calculation_period": {
        "type": "weekly",
        "start": "monday"
    },
    "time_range": {
        "from": "1555000000000",
        "to": "1561000000000"
    },
    "initial_state": "0",
    "consider_downtime" : false,
    "consider_event_adjustments": false,
    "events": [
        {
            "host_name": "host1.example.com",
            "service_description": "disk_agent",
            "timestamp": "1559720464000",
            "state": "0",
            "type": "hard_state"
        },
        {
            "host_name": "host1.example.com",
            "service_description": null,
            "timestamp": "1559661092000",
            "state": "0",
            "type": "hard_state"
        }
    ],
    "downtimes": [],
    "event_adjustments": [],
    "target_availability": 99.5,
    "expected_monitored_objects": [
        {
            "host_name": "host1.example.com",
            "service_description": "disk_agent"
        },
        {
            "host_name": "host1.example.com",
            "service_description": null
        }
    ],
    "locale": "en_US",
    "average_availability": {
        "show_calendar": true
    }
}

This request triggers a calculation that:

  1. Takes into account only those states on Mondays between 08:00 and 18:00, and on Tuesdays between 08:00 and 12:00 and between 13:00 and 18:00.

  2. Parses all the dates and times with Europe/Rome as the time_zone.

  3. Aggregates the result by week, with the first day of the week set to Monday, according to the calculation_period.

  4. Performs the calculations for the time_range going from 1555000000000 (corresponding to Thursday April 11th 2019 16:26:40 PM UTC) to 1561000000000 (Thursday June 20th, 2019 03:06:40 AM UTC), as Unix times expressed in milliseconds.

  5. Defaults to state 0, if a state cannot be determined, for instance because there are no events in the indicated time range.

  6. Excludes all downtime events, including dt_start and dt_end from the calculations, since consider_downtime is false.

  7. Excludes all event adjustments since consider_event_adjustment is false.

  8. Processes a list of events that contains two events occurring at the 1559720464000 and 1559661092000 Unix time.

The Service Level Management module GUI automatically converts dates into Unix times. If you are using the REST API directly, you will need to convert the desired time into epoch milliseconds. You can get the current time in milliseconds (or any desired time by using the “-d” parameter) with the following commands:

# date +%s%3N      # get the current time in milliseconds
1561031493613
# date -d 2019-06-20 -d 08:01:55AM +%s%3N
1561010515000

Event types and states are defined by Icinga and included in their reference documentation, section Monitoring Basics for Hosts and Services.

To test an availability request, either construct one or cut and paste the request above into a shell as a shell variable (e.g., export DATA=‘<paste>’), then call the REST API with curl like this:

curl -Ss -X POST -H "Content-Type:application/json" --data "$DATA" http://slmd.neteyelocal:4949/api/availability_calculation_full

The resulting (unformatted) JSON response should be similar to the one shown here:

{
  "monitored_objects": [
    {
      "host_name": "host1.example.com",
      "service_description": null,
      "calculation_periods": [
        {
          "from": 1555279200000,
          "to": 1555884000000,
          "states_ms": {
            "OPERATIVE": {
              "HARD_UP": 68400000,
              "HARD_DOWN": 0,
              "HARD_UNREACHABLE": 0,
              "SOFT_DOWN": 0,
              "SOFT_UNREACHABLE": 0
            },
            "IN_DOWNTIME": {
              "HARD_UP": 0,
              "HARD_DOWN": 0,
              "HARD_UNREACHABLE": 0,
              "SOFT_DOWN": 0,
              "SOFT_UNREACHABLE": 0
            },
            "TOTAL": 68400000
          }
        },
        { "..." : "..."  },
      ]
    },
    {
      "host_name": "host1.example.com",
      "service_description": "disk_agent",
      "calculation_periods": [
        {
          "from": 1555279200000,
          "to": 1555884000000,
          "states_ms": {
            "OPERATIVE": {
              "HARD_OK": 68400000,
              "HARD_WARNING": 0,
              "HARD_CRITICAL": 0,
              "HARD_UNKNOWN": 0,
              "SOFT_WARNING": 0,
              "SOFT_CRITICAL": 0,
              "SOFT_UNKNOWN": 0
            },
            "IN_DOWNTIME": {
              "HARD_OK": 0,
              "HARD_WARNING": 0,
              "HARD_CRITICAL": 0,
              "HARD_UNKNOWN": 0,
              "SOFT_WARNING": 0,
              "SOFT_CRITICAL": 0,
              "SOFT_UNKNOWN": 0
            },
            "TOTAL": 68400000
          }
        },
        { "..." : "..."  },
        {
          "from": 1560117600000,
          "to": 1560722400000,
          "states_ms": {
            "OPERATIVE": {
              "HARD_OK": 68400000,
              "HARD_WARNING": 0,
              "HARD_CRITICAL": 0,
              "HARD_UNKNOWN": 0,
              "SOFT_WARNING": 0,
              "SOFT_CRITICAL": 0,
              "SOFT_UNKNOWN": 0
            },
            "IN_DOWNTIME": {
              "HARD_OK": 0,
              "HARD_WARNING": 0,
              "HARD_CRITICAL": 0,
              "HARD_UNKNOWN": 0,
              "SOFT_WARNING": 0,
              "SOFT_CRITICAL": 0,
              "SOFT_UNKNOWN": 0
            },
            "TOTAL": 68400000
          }
        }
      ]
    }
  ],
  "events": {
      "skipped": {
        "ack": 1,
        "ack_deleted": 12
      },
      "unknown": 1
  }
}

Remember that in the response, only periods that fall entirely into the calculation period are included; therefore, in the above response some days will be excluded because they are not part of a full week that starts on a Monday.

The events field of the response contains a report of the events that the Backend has skipped on purpose or was not able to process because it is of type unknown. In this example, we have 13 skipped events (1 of type ack and 12 of type ack_deleted) and one event that was completely unknown. Detailed information about unknown events can be found in the application logs.

Warning

If you are constructing such a structure by hand, note that it is easy to make mistakes which will be rejected by the SLM service. For instance, formatting the hour as 8:00 instead of 08:00 will return an error. Additionally, errors when creating timestamps will typically lead to the return of an empty set of results like this: {"periods":[], "events": { "skipped": {}, "unknown": 0 }}

Implementation Notes

  • All timestamps used throughout the SLM module are expressed as Unix time in milliseconds.

  • The from field of a time range is inclusive, while the to field instead is exclusive.

Jobs

Report Scheduling Job

The systemd service icinga-reporting.service is the job that is in charge of performing the schedule of the Reports configured in the Reporting module.

This means that, in case you need to have a look at the actions performed to schedule your Reports, you can refer to this service, for example with:

journalctl -u icinga-reporting.service -f

The icinga-reporting.service service is bound to the php-fpm.service, in such a way that on NetEye Cluster environments the service will run only on one node.

Note

For debugging the failure of reporting scheduling jobs, check /neteye/shared/icingaweb2/log/icinga-reporting.log which contains the complete error logs occurred during the execution.

Report generation

Resource Report

SLM Resource Report is generated through icingacli using the dedicated user neteye_grafana_readonly authenticated using a JWT token. All required configurations are automatically performed during neteye_secure_install and must not be modified by the user.

Configuration perfomed are the following:

  • A role neteye_grafana_read_only_role is added to /neteye/shared/icingaweb2/conf/roles.ini

  • The JWT token is generated in /neteye/shared/icingaweb2/conf/modules/analytics/jwt-tokens/neteye_grafana_readonly.jwt alongside a key-pair. Public key can be found in /neteye/shared/icingaweb2/conf/modules/neteye/jwt-keys/neteye-jwt.pub

  • A backend is added into /neteye/shared/icingaweb2/conf/authentication.ini to allow by default neteye login using JWT tokens validated using the aforementioned public key.

Note

During the Resource Report generation, some temporary users (i.e., neteye_report_temporary_XXXXXXXX) are created in the ITOA Module. They are part of the process and will be removed as soon as the process completes.

Template Customization

SLM allows users to customize the appearance of the Availability Report by overwriting the templates for the report. The default templates are stored in /usr/share/slmd/templates/. Custom reports are built using the Handlebars templating engine; hence all necessary files that you would use need to have the .hbs extension. You can find some basic notions of Handlebar’s syntax and capabilities in the official language guide. Together with the templates, we also provide a list of all related variables in the same file. There are different types of variables:

  • boolean: A boolean, that can be evaluated in an {{#if }}

  • integer: A normal integer.

  • float: A floating-point number. Should not be currently used because of formatting issues.

  • string: A string.

  • list<type>: A list with values of a specific type. It can be iterated over with {{#each }} to get access to the inner fields.

  • optionals: These types are listed in the file as null|*type*. Variables with this type will evaluate to false in a {{#if }} block, if they are null.

For a step-by-step guide check out How To Create a Customised Theme For SLM Availability Reports

Note

If a custom template is set, then future updates to the base templates will not be visible as it is not used in favor of the custom one. Therefore the changes made might need to be migrated in the future.

Helper Functions

Helper functions are functions that can be called from the template to do a certain task. There are currently two helper-functions that can be used in the templates:

  • translate: The translate helper-function takes a key as an input and depending on the set LOCALE outputs the correspondent translation, saved in /usr/share/slmd/i18n/

  • markdown: The markdown helper-function takes a string as an argument and interprets it as GitHub Flavored Markdown, outputting HTML. For this, the function must be allowed to write raw HTML to the template. This can be achieved with triple curly brackets: {{{markdown }}}. Should the input string have contained any html than it will be sanitized by the function.

Security

Customizing templates gives you the ability to allow for unescaped HTML to be embedded into the report with the triple curly brackets while the normal double brackets sanitize the input. This can lead to openings for Cross Site Scripting (XSS) attacks, if an attacker gains access to the input over an other channels. Therefore, only the fields with the double brackets or with the markdown helper-function, which escapes the input, should be included.