User Guide

Network UPS

The nep-network-ups provides the minimum requirements to implement a basic monitoring of an Ups Device . With nep-network-ups it is possible to perform standard monitoring of:

  • UPS basic information

Using the provided objects, is possible to:

  • Battery

  • Hardware

  • services

Minimum supported environment

This package can be installed on systems running the software described below. Systems with equivalent components are also suitable for installation.

Required software

Requirements

NetEye

Version 4.20+

NetEye modules

Core

Package requirements

Service and Host Template shipped with package nep-network-ups require the following nep:

  • nep-common

Setup instructions

If all requirements are met, you can now install this package. To manually set up the nep-network-ups package, just use nep-setup utility to install it.

nep-setup install nep-network-ups

Available Objects

This section contains a description of all the Objects from this package that can be used to build your own monitoring environment.

Director Objects

The Package contains the following Director Objects.

Host Templates

The following Host Templates can be used to freely create Host Objects. Remember to not edit these Host Templates because they will be restored/updated at the next NEP package update.

Host Template name

Description

nx-ht-snmp-ups

Describe a generic UPS device object.

Data Lists

The following Data Lists can be freely customized by the End User. Their purpose is to provide easy data filling to better describe the monitoring environment.

Datalist name

Description

[NX] UPS Mode List

Used to provide the list of check available for nx-c-check_ups_health command

Service Templates

The following Service Templates can be used to freely create Service Objects, Service Apply Rules or Service Sets. Remember to not edit these Service Templates because they will be restored/updated at the next NEP Package update.

Template name

Run on Agent

Description

nx-st-agentless-snmp-ups-health

No

Checks all aspects of monitoring of an UPS device

Service Sets

The following Service Sets can be used to freely monitor Host Objects. Remember to not edit these Service Sets because they will be restored/updated at the next NEP Package update.

Service Set name

Description

nx-ss-network-ups-snmp-basic

Service Set providing common monitoring for UPS Device: Uptime, Hardware, Battery

ITOA Dashboards

The Package does not provide any ITOA Dashboards right now.

Package’s objects list

Object Type

Object Name

Do not edit

Containing File

Director Command

nx-c-check_ups_health

No

baskets/import/nep-network-ups-02-command.json

Director Data List

[NX] UPS Mode List

No

baskets/import/nep-network-ups-01-datalist.json

Director Host Template

nx-ht-snmp-ups

No

baskets/import/nep-network-ups-03-host.json

Director Service Set

nx-ss-network-ups-snmp-basic

No

baskets/import/nep-network-ups-05-serviceset.json

Director Service Template

nx-st-agentless-snmp-ups-health

No

baskets/import/nep-network-ups-04-service.json