Network UPS¶
The nep-network-ups provides the minimum requirements to implement a basic monitoring of an Ups Device .
With nep-network-ups it is possible to perform standard monitoring of:
UPS basic information
Using the provided objects, is possible to:
Battery
Hardware
services
Minimum supported environment¶
This package can be installed on systems running the software described below. Systems with equivalent components are also suitable for installation.
Required software |
Requirements |
|---|---|
NetEye |
Version |
NetEye modules |
|
Package requirements¶
Service and Host Template shipped with package nep-network-ups require the following nep:
nep-common
Setup instructions¶
If all requirements are met, you can now install this package. To manually set up the nep-network-ups package, just use nep-setup utility to install it.
nep-setup install nep-network-ups
Available Objects¶
This section contains a description of all the Objects from this package that can be used to build your own monitoring environment.
Director Objects¶
The Package contains the following Director Objects.
Host Templates
The following Host Templates can be used to freely create Host Objects. Remember to not edit these Host Templates because they will be restored/updated at the next NEP package update.
Host Template name |
Description |
|---|---|
nx-ht-snmp-ups |
Describe a generic UPS device object. |
Data Lists
The following Data Lists can be freely customized by the End User. Their purpose is to provide easy data filling to better describe the monitoring environment.
Datalist name |
Description |
|---|---|
[NX] UPS Mode List |
Used to provide the list of check available for |
Service Templates
The following Service Templates can be used to freely create Service Objects, Service Apply Rules or Service Sets. Remember to not edit these Service Templates because they will be restored/updated at the next NEP Package update.
Template name |
Run on Agent |
Description |
|---|---|---|
nx-st-agentless-snmp-ups-health |
No |
Checks all aspects of monitoring of an UPS device |
Service Sets
The following Service Sets can be used to freely monitor Host Objects. Remember to not edit these Service Sets because they will be restored/updated at the next NEP Package update.
Service Set name |
Description |
|---|---|
nx-ss-network-ups-snmp-basic |
Service Set providing common monitoring for UPS Device: Uptime, Hardware, Battery |
ITOA Dashboards¶
The Package does not provide any ITOA Dashboards right now.
Package’s objects list¶
Object Type |
Object Name |
Editable |
Containing File |
|---|---|---|---|
Director Command |
nx-c-check_ups_health |
No |
baskets/import/nep-network-ups-02-command.json |
Director Data List |
[NX] UPS Mode List |
No |
baskets/import/nep-network-ups-01-datalist.json |
Director Host Template |
nx-ht-snmp-ups |
No |
baskets/import/nep-network-ups-03-host.json |
Director Service Set |
nx-ss-network-ups-snmp-basic |
No |
baskets/import/nep-network-ups-05-serviceset.json |
Director Service Template |
nx-st-agentless-snmp-ups-health |
No |
baskets/import/nep-network-ups-04-service.json |
