Network MessPC EthernetBox¶
The nep-network-messpc-ethernetbox provides the requirements to implement a monitoring of MessPC EthernetBox sensors.
With nep-network-messpc-ethernetbox it is possible to perform standard monitoring of temperature, humidity, smoke and water sensors
Minimum supported environment¶
This package can be installed on systems running the software described below. Systems with equivalent components are also suitable for installation.
Required software |
Requirements |
|---|---|
NetEye |
Version |
NetEye modules |
|
Package requirements¶
Service and Host Template shipped with package nep-network-messpc-ethernetbox require the following nep:
nep-common
Setup instructions¶
If all requirements are met, you can now install this package. To manually set up the nep-network-kemp-load-balancer package, just use nep-setup utility to install it.
nep-setup install nep-network-kemp-load-balancer
Once installed the EthernetBox hosts should be created using nx-ht-ethernetbox host template.
The check_pcmeasure2 check it’s a GIT project open - The plugins updated could be download from check_pcmeasure2 The manual to use the plugin is there: Readme
Available Objects¶
This section contains a description of all the Objects from this package that can be used to build your own monitoring environment.
Director Objects¶
This package contains the following Director Objects:
Host Templates
The following Host Templates can be used to freely create Host Objects. Remember to not edit these Host Templates because they will be restored/updated at the next NEP package update.
Host Template name |
Description |
|---|---|
nx-ht-ethernetbox |
Service Templates
The following Service Templates can be used to freely create Service Objects, Service Apply Rules or Service Sets. Remember to not edit these Service Templates because they will be restored/updated at the next NEP Package update.
Template name |
Run on Agent |
Description |
|---|---|---|
nx-st-agentless-pcmeasure2 |
No |
Checks MessPC EthernetBox sensors using check_pcmeasure2 |
Service Sets
The following Service Sets can be used to freely monitor Host Objects. Remember to not edit these Service Sets because they will be restored/updated at the next NEP Package update.
Service Set name |
Description |
|---|---|
nx-ss-network-ethernetbox |
Service Set providing monitoring for Ethernet Box and related sensors (temperature, humidity, smoke, water, …) |
ITOA Dashboards¶
The Package does not provide any ITOA Dashboards right now.
Package’s objects list¶
Object Type |
Object Name |
Editable |
Containing File |
|---|---|---|---|
Director Command |
nx-c-check_pcmeasure2 |
No |
baskets/import/nep-network-messpc-ethernetbox-02-command.json |
Director Host Template |
nx-ht-ethernetbox |
No |
baskets/import/nep-network-messpc-ethernetbox-03-host.json |
Director Service Set |
nx-ss-network-ethernetbox |
No |
baskets/import/nep-network-messpc-ethernetbox-05-serviceset.json |
Director Service Template |
nx-st-agentless-pcmeasure2 |
No |
baskets/import/nep-network-messpc-ethernetbox-04-service.json |
