Network Dell iDRAC¶

The nep-network-dell-idrac provides the minimum requirements to implement a basic monitoring of a iDRAC using SNMP protocol. With nep-network-dell-idrac it is possible to perform standard monitoring of:

All Base monitoring DELL iDRAC

Using the provided objects, is possible to:

HW Temperature
HW Memory
HW Power Supplies
HW Fans
HW Power Redundancy
HW Disks
HW Raid
HW Battery
HW Overview

The offical plugin manual

Minimum supported environment¶

This package can be installed on systems running the software described below. Systems with equivalent components are also suitable for installation.

Required software	Requirements
NetEye	Version `4.20+`
NetEye modules	`Core`

Package requirements¶

Service and Host Template shipped with package nep-network-dell-idrac require the following nep:

nep-common
nep-network-base

Setup instructions¶

If all requirements are met, you can now install this package. To manually set up the nep-network-dell-idrac package, just use nep-setup utility to install it.

nep-setup install nep-network-dell-idrac

Once installed the following custom variables should be set:

nx_hardware_vendor = Dell
host_os = iDRAC

Available Objects¶

This section contains a description of all the Objects from this package that can be used to build your own monitoring environment.

Director Objects¶

This package contains the following Director Objects:

Data Lists

The following Data Lists can be freely customized by the End User. Their purpose is to provide easy data filling to better describe the monitoring environment.

Datalist name	Description
[NX] iDRAC Mode List	Used to provide the list of check available for `check_nwc_health` command

Service Templates

The following Service Templates can be used to freely create Service Objects, Service Apply Rules or Service Sets. Remember to not edit these Service Templates because they will be restored/updated at the next NEP Package update.

Template name	Run on Agent	Description
nx-st-agentless-snmp-idrac	No	Checks all base monitoring DELL iDRAC using check_idrac2

Service Sets

The following Service Sets can be used to freely monitor Host Objects. Remember to not edit these Service Sets because they will be restored/updated at the next NEP Package update.

Service Set name	Description
nx-ss-network-idrac-base	Service Set providing all Base monitoring DELL iDRAC: Temperature,Memory,Power Supplies,Fans,Power Redundancy,Disks,Raid,Battery,Overview

ITOA Dashboards¶

The Package does not provide any ITOA Dashboards right now.

Package’s objects list¶

Object Type	Object Name	Editable	Containing File
Director Command	check_idrac2	No	baskets/import/nep-network-dell-idrac-02-command.json
Director Data List	[NX] iDRAC Mode List	No	baskets/import/nep-network-dell-idrac-01-datalist.json
Director Service Set	nx-ss-network-idrac-base	No	baskets/import/nep-network-dell-idrac-04-service.json
Director Service Template	nx-st-agentless-snmp-idrac	No	baskets/import/nep-network-dell-idrac-04-service.json