Network Sophos firewall¶
The nep-network-sophos-firewall provides the minimum requirements to implement a basic monitoring of a Sophos firewall using SNMP protocol.
With nep-network-sophos-firewall it is possible to perform standard monitoring of a Sophos XG firewall using Sophos SNMP OIDs based on proprietary MIB
Using the provided objects, is possible to:
Connected Users
Device Name
Disk Usage
Memory Usage
Model
Firmware Version
Serial Number
Swap Usage
Tested on:
Firmware > 18.0
Series XG
Minimum supported environment¶
This package can be installed on systems running the software described below. Systems with equivalent components are also suitable for installation.
Required software |
Requirements |
|---|---|
NetEye |
Version |
NetEye modules |
|
Package requirements¶
Service and Host Template shipped with package nep-network-sophos-firewall require the following nep:
nep-common
nep-network-base
The service checks in this nep modulue are based on check_snmp and specific SNMP OIDs and needs Sophos SNMP MIB installation on NetEye system. MIB can be downloaded from SOPHOS-XG-MIB and it must be copied in /usr/share/snmp/mibs on all NetEye nodes Sophos SNMP manual reference can be downloaded from : Sophos Site
Setup instructions¶
If all requirements are met, you can now install this package. To manually set up the nep-network-sophos-firewall package, just use nep-setup utility to install it.
nep-setup install nep-network-sophos-firewall
Once installed the following custom variables should be set on the Host Objects where is required:
nx_hardware_vendor = Sophos
Available Objects¶
This section contains a description of all the Objects from this package that can be used to build your own monitoring environment.
Director Objects¶
This package contains the following Director Objects:
Service Sets
The following Service Sets can be used to freely monitor Host Objects. Remember to not edit these Service Sets because they will be restored/updated at the next NEP Package update.
Service Set name |
Description |
|---|---|
nx-ss-firewall-sophos-xg |
Service Set providing a common base in order to monitor a Sophos XG firewall: - Connected Users, Device Name, Disk Usage, Memory Usage, Model, Firmware, Serial Number, Swap Usage |
ITOA Dashboards¶
The Package does not provide any ITOA Dashboards right now.
Package’s objects list¶
Object Type |
Object Name |
Editable |
Containing File |
|---|---|---|---|
Director Service Set |
nx-ss-firewall-sophos-xg |
No |
baskets/import/nep-network-sophos-firewall-05-serviceset.json |
