Network Palo Alto Fireall¶
The nep-network-paloalto-firewall provides the minimum requirements to implement a basic monitoring of a Palo Alto Firewall using SSH protocol.
With nep-network-paloalto-firewall it is possible to perform standard monitoring of:
Environment Health
HA-Status
Interfaces Health
IPSEC Tunnels Health
Licenses Stauts
System Health
Minimum supported environment¶
This package can be installed on systems running the software described below. Systems with equivalent components are also suitable for installation.
Required software |
Requirements |
|---|---|
NetEye |
Version |
NetEye modules |
|
Package requirements¶
Service and Host Template shipped with package nep-network-paloalto-firewall require the following nep:
nep-common
nep-network-base
nep-centreon-plugins-base
The Package require the installation of following packages: - centreon-plugin-Network-Firewalls-Paloalto-Standard-Ssh - perl-Pod-Parser - perl-DateTime - libssh
On NetEye environment this operation is automatically done by Setup Routine.
Setup instructions¶
If all requirements are met, you can now install this package. To manually set up the nep-network-paloalto-firewall package, just use nep-setup utility to install it.
nep-setup install nep-network-paloalto-firewall
Once installed the following custom variables should be set:
nx_hardware_vendor = Palo Alto
Available Objects¶
This section contains a description of all the Objects from this package that can be used to build your own monitoring environment.
Director Objects¶
This package contains the following Director Objects:
Data Lists
The following Data Lists can be freely customized by the End User. Their purpose is to provide easy data filling to better describe the monitoring environment.
Datalist name |
Description |
|---|---|
[NX] Centreon PaloAlto ssh backend list |
Used to provide ssh backend (libssh - default, plink, sshcli) |
[NX] Centreon PaloAlto Mode List |
Used to provide the list of check available for command |
Service Templates
The following Service Templates can be used to freely create Service Objects, Service Apply Rules or Service Sets. Remember to not edit these Service Templates because they will be restored/updated at the next NEP Package update.
Template name |
Run on Agent |
Description |
|---|---|---|
nx-st-agentless-ssh-centreon-paloalto |
No |
Checks all base monitoring Palo Alto Firewall using Centreon Plugin |
Service Sets
The following Service Sets can be used to freely monitor Host Objects. Remember to not edit these Service Sets because they will be restored/updated at the next NEP Package update.
Service Set name |
Description |
|---|---|
nx-ss-paloalto-firewall |
Service Set providing common monitoring for Palo Alto firewalls |
ITOA Dashboards¶
The Package does not provide any ITOA Dashboards right now.
Package’s objects list¶
Object Type |
Object Name |
Editable |
Containing File |
|---|---|---|---|
Director Command |
nx-c-cetreon-paloalto_ssh |
No |
baskets/import/nx-c-cetreon-paloalto_ssh02-command.json |
Director Data List |
[NX] Centreon PaloAlto ssh backend list |
No |
baskets/import/nep-network-paloalto-firewall-01-datalist.json |
Director Data List |
[NX] Centreon PaloAltro Mode List |
No |
baskets/import/nep-network-paloalto-firewall-01-datalist.json |
Director Service Set |
nx-ss-paloalto-firewall |
No |
baskets/import/nep-network-paloalto-firewall-05-serviceset.json |
Director Service Template |
nx-st-agentless-ssh-centreon-paloalto |
No |
baskets/import/nep-network-paloalto-firewall-04-service.json |
